How To Replace iPhone SE Screen

How To Replace iPhone SE Screen?

iPhone SE Screen Replacement

Introduction: The iPhone Service Center in Kolkata is a trustworthy online place where you can repair any kind of iPhone model. If you are facing any iPhone models regarding issues like screen damage, battery issues, power button, volume button, earpiece replacement, speaker replacement, microphone, camera, etc. then it’s time to repair your device or replace the spare parts if required. We also provide some information regarding any damage issues that occur on your iPhone and you can fix these issues at home. So, here the question is How to replace iPhone SE screen? Here we provide some steps that are the best way to replace your iPhone SE screen.

Tools you can use:

  • Spudger
  • P2 Pentalobe Screwdriver iPhone
  • Philips #000 Screwdriver
  • Tweezer

The following steps of How to replace iPhone SE Screen:

Step – 1

Removing the Pentalobe screws

How To Replace iPhone SE Screen

  • First power off your iPhone.
  • Removes the two 3.9 mm Pentalobe screws.

Step – 2

Display Separation Prevention

How To Replace iPhone SE Screen

  • If your display glass is cracked then first properly covered the glass with the help of tape.
  • With the help of iSclack and suction cup pull the front panel up from the rear case.

Step – 3

Starting the iSlack Starting Procedure

How To Replace iPhone SE Screen

  • Safely use the iSclack for the opening of your iPhone just enough to separate the pieces.
  • Open the phone and reveal the metal bracket covering the home button cable.

Step – 4

Removing The Touch ID Cable Bracket

iPhone SE Screen Replacement

  • Then by using a spudger to push the bracket free and remove it with tweezers.
  • Gently remove the connector and open the display to about a 90º angle.

Step – 5

iPhone Screen Damage Problems

 

  • Secure place the display of your iPhone.
  • Gently remove the metal battery connector bracket from the iPhone by removing two 1.6 mm Phillips #000 screws.

Step – 6

Opening Up The Phone

iPhone SE Screen Replacement

 

Then remove these screws that connect the front panel assembly cable bracket to the logic board:

    • One 1.7 mm Phillips #000 screw
    • One 1.2 mm Phillips #000 screw
    • One 1.3 mm Phillips #000 screw

Step – 7

Home Button Assembly

How To Replace iPhone SE Screen

  • Then disconnect the LCD cable connector as well as the digitizer cable connector.
  • Remove the home button bracket from the display assembly by removing the two 1.4 mm Phillips #000 screws

Step – 8

Screen

How To Replace iPhone SE Screen

  • Remove the home button assembly from the front panel.
  • The screen remains.

 

 

 

 

Here, we provide complete information about the iPhone 4 screen replacement Replacement. It helps you to fix the screen related issues at home. For more information visit our Youtube channel. But sometimes it is not easily resolved, in this case, don’t try to fix it at home. At, iPhone service center in Kolkata we can resolve any kind of screen related issues at a very affordable cost. We always use the latest technology to repair or fix the problems. Images are taken from iFixit.

So, this is the answer to the question of How To Do iPhone 4 Screen Replacement.

 

Why choose iPhone Service Center In Kolkata?

  • Best certified and experienced engineers and technicians hired by the iPhone service center.
  • The latest techniques used by us.
  • Free pickup and delivery service.
  • Parts protection and parts warranty for secure service.
  • The great support team for all customer queries.

Frequently Asked Questions:

1. What Kind Of Precautions You Must Take During iPhone SE Screen Replacement?

  • The first and most important thing is you must use globes during this process.
  • Because your iPhone is a delicate device and globes protect it from bacteria, sweating or any other harmful components that are present on your hand.
  • Also, the rubber and plastic material is safe because it protects you from electric shock.
  • Also, gently use the tools like a spudger or screwdriver, so that your device is in better condition after replacement.

2. What are the important tools needed in the iPhone SE Screen Replacement process?

The important tools are:

  • Spudger
  • P2 Pentalobe Screwdriver iPhone
  • Philips #000 Screwdriver
  • Anti- Static Project Tray

3. How To Tell If iPhone SE Screen is damage?

There are so many reasons that your iPhone SE Screen becomes faulty or damage like factory defect and extensive use, accidentally falls or spills, water damage, etc. And the signs of the bad screen are:

  • Blue or Black-line errors
  • Display and graphics problems
  • Flickering in screen
  • Lack in touch sensitivity

Leave a Comment

Your email address will not be published. Required fields are marked *

Looking For Your Phone Repair?

Just fill out the form and our support team will get back to you right away.