iPhone Speaker repair

How To Replace iPhone SE Speaker Enclosure?

iPhone SE Speaker Enclosure Replacement

CALL 06290389817 | LIVE CHAT | BOOK YOUR REPAIR TODAY

Introduction: The iPhone Service Center in Kolkata is a trustworthy online place where you can repair any kind of iPhone model. If you are facing any iPhone models regarding issues like screen damage, battery issues, power button, volume button, earpiece replacement, speaker replacement, microphone, camera, etc. then it’s the time to repair your device or replace the spare parts if required. We also provide some information regarding any speaker damage issues that occur on your iPhone SE and you can fix these issues at home. So, here the question is How To Replace iPhone SE Speaker Enclosure? Here we provide some steps that are the best way to replace your iPhone SE speaker.

Tools you can use:

  • P2 Pentalobe Screwdriver iPhone
  • Philips #000 Screwdriver
  • Sim card eject tool
  • iSclack
  • Spudger

The following steps of How to replace iPhone SE speaker enclosure:

Step – 1

Removing the Pentalobe screws

How To Replace iPhone SE Screen

  • First power off your iPhone.
  • Removes the two 3.9 mm Pentalobe screws.

Step – 2

Taping the display glass

How To Replace iPhone SE Screen

  • If your display glass is cracked then first properly covered the glass with the help of tape.
  • With the help of iSclack and suction cup pull the front panel up from the rear case.

Step – 3

Starting the iSlack Starting Procedure

How To Replace iPhone SE Screen

  •  Safely use the iSclack for the opening of your iPhone just enough to separate the pieces.
  • Open the phone and reveal the metal bracket covering the home button cable.

Step – 4

Removing The Touch ID Cable Bracket

iPhone SE Screen Replacement

  •  Then by using a spudger to push the bracket free and remove it with tweezers.
  •  Gently remove the connector and open the display to about a 90º angle.

Step – 5

iPhone Screen Damage Problems

  •  Secure place the display of your iPhone.
  • Gently remove the metal battery connector bracket from the iPhone by removing two 1.6 mm Phillips #000 screws.

Step – 6

Opening Up The Phone

iPhone SE Speaker Enclosure Replacement

Then remove these screws that connect the front panel assembly cable bracket to the logic board:

    • One 1.7 mm Phillips #000 screw
    • One 1.2 mm Phillips #000 screw
    • One 1.3 mm Phillips #000 screw

Step – 7

Speaker

How To Replace iPhone SE Speaker Enclosure

 

  • Then disconnect the LCD cable connector as well as the digitizer cable connector.
  • Remove the front panel assembly.

Step – 8

How To Replace iPhone SE Speaker Enclosure

  • Remove these Philips #000 screws:

one 2.9 mm screws

one 1.5 mm screws

one 3.6 mm screws

Step – 9

How To Replace iPhone SE Speaker Enclosure

 

  • With the help of the spudger just lift the speaker.
  • Then remove the speaker from the iPhone.

 

 

Here, we provide complete information about the iPhone SE speaker Replacement. It helps you to fix the speaker-related issues at home. For more information visit our Youtube channel. But sometimes it is not easily resolved, in this case, don’t try to fix it at home. At, iPhone service center in Kolkata we can resolve any kind of screen related issues at a very affordable cost. We always use the latest technology to repair or fix the problems. Images are taken from iFixit.

Why choose iPhone Service Center In Kolkata?

  • Best certified and experienced engineers and technicians hired by the iPhone service center.
  • The latest techniques used by us.
  • Free pickup and delivery service.
  • Parts protection and parts warranty for secure service.
  • The great support team for all customer queries.

Frequently Asked Questions:

  1. What Kind Of Precautions You Must Take During iPhone SE Speaker Enclosure Replacement?
  • The first and most important thing is you must use globes during this process.
  • Because your iPhone is a delicate device and globes protect it from bacteria, sweating or any other harmful components that are present on your hand.
  • Also, the rubber and plastic material is safe because it protects you from electric shock.
  • Also, gently use the tools like a spudger or screwdriver, so that your device is in better condition after replacement.
  1. What are the important tools needed in the iPhone SE Speaker Enclosure Replacement process?

The important tools are:

  • P2 Pentalobe Screwdriver iPhone
  • Philips #000 Screwdriver
  • Sim card eject tool
  • iSclack
  • Spudger
  1. How To Tell If iPhone SE Speaker is damaged?

There are so many reasons that your iPhone SE Speaker becomes faulty or damage like factory defect and extensive use, accidentally falls or spills, water damage, etc. And the signs of the bad speaker are:

  • No sound from iPhone
  • Distorted sound from iPhone
  • Music is stopped suddenly

Conclusion

iPhone is a costly device, one must look after it very carefully, & must do regular maintenance that it demands, so checking on iPhone problems is one of the regular work for an iPhone user, as if you can identify a problem early, that can eventually save you from lots of troubles and will save your precious money, and once you detect a problem like in this case Speaker Damage, you must fix it fast, as longer the time goes, greater the damage will be.

CALL 06290389817 | LIVE CHAT | BOOK YOUR REPAIR TODAY

Leave a Comment

Your email address will not be published. Required fields are marked *